TITAN:12 Application Guide

TITAN:12 Detailed Application Guide

Shake well prior to use. Once opened, use within 7 days.

TITAN:12 is a true nano-ceramic coating and will start to cure once it comes into contact with air. TITAN:12 has an unopened shelf life of 12 months and must be used within 7 days of opening.

TITAN:12 Can be applied to all paintwork, alloy wheels and painted plastics. DO NOT apply to glass or uncoated plastics.

We recommend using a microfiber applicator to apply the product and 2 microfiber cloths for removal, 1 short-pile, 1 plush. TITAN:12 can also be applied using a short pile microfibre cloth

INSTRUCTIONS

  • Apply in a shaded area. do not apply in direct sunlight or onto hot panels.
  • Ensure that the vehicle is thoroughly washed and decontaminated prior to application and only apply to dry panels. We recommend that a full decon is carried out before application. TITAN:12 bonds best to bare paintwork and will give the best possible protection and longevity when applied correctly to the vehicle.
  • For best results, apply a dedicated panel prep solution to the vehicle to ensure any oils have been removed from the surface, allowing the coating to achieve the best possible bond.
  • Shake well for 30 seconds prior to use.
  • Spray TITAN:12 on to a clean microfiber applicator or cloth 5-6 times to prime the surface ready for application.

  • Apply the coating in a crosshatch pattern in areas no bigger than 20”X20” at a time. TITAN:12 can be sprayed directly on to the vehicle surface. 5-6 sprays should be applied per 20”X20” area to ensure optimal coverage. Divide a typical bonnet into 4 sections, a door into 2 sections. A whole full wing/Rear quarter panel can be coated at a time. 

  • TITAN:12 has no initial cure time and should be removed as soon as the product has been correctly spread over the area. Use a short pile microfiber to level the coating and remove the excess product, follow straight away with a final full buff with a fresh microfiber cloth. Use this same process until the full vehicle is coated. An extra layer can be applied within the first hour. 
  • A typical car should only take around 15-20 minutes to apply 1 complete layer

Use protective glove when applying and apply in a well ventilated area

Do not apply to glass – Do not apply in direct sunlight.

Keep all surfaces dry for 24 hours and do not wash for 72 hours